In addition to the functions of waterproof, dustproof and anti-corrosion, the three-proof lamp also has the functions of anti-glare, shockproof and explosion-proof.
1. The design of multi-channel earthquake-proof structure is adopted in the anti-vibration to ensure that it will not be damaged in long-term use in high-frequency, multi-frequency vibration and other environments.
2. The selected transparent parts are optimized and designed with advanced lighting optics principles to ensure uniform and soft light without glare and ghosting. It can avoid discomfort and fatigue of construction workers.
3. The surface of the lamp protection box is treated with nano-sprayed, moisture-proof and anti-corrosion through its actual working environment to prevent the entry of dust and moisture.
The three-proof light has the following characteristics:
1. Applicable to any country and region because of the wide input voltage range.
2. Its light efficiency is high, which can reach more than 100 lumens.
3. Advanced heat dissipation technology ensures that the luminous flux maintenance rate is around 94%.
4. Built-in isolated low voltage constant current drive, so that its power factor is above 0.9, safe, stable and reliable in use.
5. The lamp housing has passed 2500V withstand voltage test to ensure its strength.
6. Because the lamp housing is extruded from flame-retardant hard materials, it has the characteristics of corrosion resistance, light weight and high strength.
7. Convenient installation, maintenance-free and long life.
8. The protection grade is IP65, which has the characteristics of waterproof, dustproof, anti-corrosion, explosion-proof and low temperature resistance.
There are many precautions in the use of the three-proof lamp.
1. In the process of installation and disassembly, let professionals install and disassemble.
2. Before replacing the light source and disassembling the lamp, the power supply must be cut off, and it is forbidden to open the lamp with power.
3. During use, if there is a certain temperature rise on the surface of the lamp, this is a normal phenomenon, but it should be noted that the center temperature of the transparent part is high, so it cannot be touched.
4. In the maintenance of the lamp, the power must be disconnected first.
5. During transportation, it needs to be placed in the equipped carton and added with foam for shock absorption.