Tri-proof light technology is being recognized by more and more people. The traditional tri-proof light is a fluorescent energy-saving lamp, but now more and more customers require switching to a tri-proof light to save energy, because this can save costs and develop The emerging technologies of the Tri-proof Light are as follows:
1.Environmental protection: The environmental protection benefits are better. There is no ultraviolet and infrared in the spectrum of the LED Tri-proof Lamp. There is no heat or radiation. The glare is very small and can be recycled. Contact, so it is a typical green light source.
2. High-tech frontier: Compared with the monotonous lighting effect of traditional light sources, LED Tri-proof Light is a low-voltage microelectronic product. It has successfully integrated computer technology, network communication technology, image processing technology, and embedded circulation fan control technology. It is also a digital information product. It is a "high-tech frontier" technology for semiconductor optoelectronic devices. It has online programming capabilities and unlimited advancement and flexibility.
3. Multiple changes: The LED three proof lights can use the three primary colors of red, green, and blue. Under the control of computer technology, the three colors can be arbitrarily mixed with different light colors.
There are two ways to install the tri-proof light: 1. Ceiling installation: According to the installation hole size of the luminaire, the corresponding installation bolt hole is punched on the position where the luminaire needs to be installed, and then it is fixed by bolts. 2. Suspension installation: Suspended installation is mainly used in places where the degree of illumination is very high and a wide range of lighting is required. During the installation, the lifting adapter plate should be fixed on the lamp with bolts, and then the cable should be connected to the lamp. The pipe thread of the lamp and the wiring steel pipe with standard pipe thread are screwed together.
The installation steps of the three-proof lamp are as follows: determine the position of the vertical lamp, and reserve (excavate) the standard pit of 1 meter 3 at the position of the vertical lamp; the three-proof lamp and mining lamp manufacturer locates and embeds the embedded parts. After the construction is completed, timely clean up the residual mud on the positioning plate, and clean the impurities on the bolts with waste oil. During the solidification of concrete, the three-proof lamp and mining lamp should be watered regularly for maintenance.